How To Fix Broken LED Light Strips
In any living space, LED lights bring a unique kind of joy and brightness. But when your LED lights stop working, they can really put a damper on your mood. That’s why we’ve put together a step-by-step guide on how to fix broken best led strip lights BLLS, so you can quickly get your room illuminated again.
Things You’ll Need
Before we dive into the repair process, here are the essential items you’ll need:
- Extra LED strips
- LED Shim
- Soldering Iron + Solder
- Clippers
- Heat Gun or Lighter
- Xacto Knife or Scissors
Note that you may not need all these items, as your specific issue might only require a few of them.
A Step-by-Step Guide to Repairing Broken LED Light Strips
Step 1: Identify the Cause
The first thing you need to do when repairing a broken LED light strip is to figure out what’s causing the problem. Take a close look at the strip to see if there are any obvious flaws or issues.
Step 2: Check the Strip and Repair
Locate the area where the lights stop working. On the strip, you’ll find four connections labeled with a “cut here” sign. Carefully cut along this line to separate the problematic strip from the working one.
Next, ensure that the new strip is parallel to the working strip and securely positioned. Solder all four connections, following the correct sequence (e.g., R to R, G to G). Once the connections are soldered tightly, plug in the strip and test it by switching on the lights in different colors.
If the strips had adhesive backing, you might need to get new adhesive. Use an acetone-soaked cloth or a citrus-based cleaner to remove the adhesive residue without damaging the strips. Just be careful to avoid contact with the LEDs, as this can cause water damage and reduce efficiency.
Step 3: Check the Power Supply
Calculate the minimum power supply size required for your led stick on lights by multiplying the strip’s length in feet by the watts generated per foot and then multiplying by 1.2. Look for a power supply with a higher wattage rating that matches or exceeds the calculated figure.
FAQs
Q: What tools do I need to fix a broken LED light strip?
A: Common tools for fixing broken LED light strips include a soldering iron, solder, heat shrink tubing, wire strippers, and a multimeter for testing connections and voltage.
Q: How do I identify the source of the issue with my LED light strip?
A: Start by visually inspecting the entire length of the strip lights for bedroom for physical damage. Use a multimeter to test for continuity, voltage, and potential short circuits. Check connections, solder joints, and the power supply.